Will not power on
Completely dead devices: no picture, no vibration, no sign of charging. We hunt the fault down on the board, point by point.
Advanced repairs
When others say it cannot be done, we open it up
Board-level repair with microsoldering for the cases other shops write off: devices that will not power on, severe water damage, and data that looked gone for good.
In plain language
What is microsoldering?
Inside your phone there is a logic board: a card about the size of two fingers with hundreds of tiny parts soldered onto it. When one of those parts burns out, gets wet or lifts off, the device stops turning on — and swapping the screen or the battery fixes nothing.
Most shops only replace whole modules: screen, battery, port. We go one level deeper. Using a microscope and precision tools we replace those millimeter-scale parts directly on the board. That is called board-level repair, and it is the difference between throwing your device away and getting it back with everything still inside.
- You get your device and your data back — photos, chats and contacts.
- It almost always costs less than buying new.
- The diagnostic is fully credited toward your repair, and if it cannot be saved we tell you straight.
Cases we solve
If your device is on this list, there is still hope
These are the diagnoses that usually end with a "cannot be fixed" at other shops.
Severe water damage
Ultrasonic cleaning, corrosion removal and replacement of the components the liquid destroyed.
Charging IC (Tristar / U2)
The device will not charge even after someone replaced the port and the cable. That chip is replaced with microsoldering.
Backlight and display filters
Screen looks black even though the device is on: we repair the backlight circuit on the board.
Face ID / TrueDepth
Module and circuit repair to bring facial recognition back.
Console GPU and reflow
Consoles with graphics faults, heat-related shutdowns, or HDMI ports torn off the board.
Data recovery
Photos, videos and contacts rescued from devices that no longer power on or connect.
Components and ICs
Replacement of resistors, capacitors, coils and integrated circuits at microscopic scale.
Our process
How we handle an advanced case
01
Advanced diagnosis
We open the device and measure the board under a microscope to find exactly which component failed. No guessing.
02
Quote with no obligation
We explain in plain language what is wrong, what can be saved and what it costs. You decide with no pressure, and if you move forward the diagnostic is fully credited toward the cost of the repair.
03
Microsoldering repair
We work the affected component with a hot-air station, microscope and precision tools.
04
Full testing
We test charging, signal, cameras, audio and everything affected before handing it back — and we check it together with you.
Credited diagnostic
Advanced diagnostic, credited toward your repair
We are on the second level of Plaza Carolina Mall, across from Victoria's Secret, Journeys and Kokomo — book online or walk in. Diagnostics are free on any device that powers on. If your device will not turn on (no power), the diagnostic has a fee that is fully credited toward your repair. We tell you the truth: if it can be fixed, what it costs; and if it cannot, we tell you before you spend more.